Accepted papers

Thank you! We have received your submission!
Oops! Something went wrong while submitting the form.

Energy and Thermal Fluids

ID1604 - AERODYNAMIC IMPROVEMENT OF A SAVONIUS TURBINE THROUGH THE USE OF BIO-INSPIRED PROTRUSIONS ON THE LEAD EDGE OF OMNIDIRECTIONAL GUIDE VANES

Speaker:

Marcela Montoya

Authors:

Marcela Montoya, Jhon F. Hincapie, and Ivan D. Patiño

Location:

Municipal Convention Center / Machupicchu 1

Date:

10/20/26 2:40 p.m.

Cross-Cutting Topics in Engineering

ID1606 - HACKATHON – A STORY OF A SUCCESSFUL EXPERIENCE AT THE MACKENZIE SCHOOL OF ENGINEERING

Speaker:

Marcos Massi

Authors:

Nelson Maestrelli, Marcos Massi, and Delmarcio Silva

Location:

University Auditorium / Room 2

Date:

10/22/26 3:00 PM

Manufacturing and Materials

ID1611 - Evolution of Lamellar Architecture in Injection-Molded Polypropylene Samples Using Small-Angle X-Ray Scattering (SAXS)

Speaker:

Daysi Alexandra Baño-Morales

Authors:

Daysi Alexandra Baño-Morales, Juan Pedro Fernández-Blázquez, and Andrea Fernández-Gorgojo

Location:

Municipal Convention Center / Tipón

Date:

10/26/21 3:40 PM

Energy and Thermal Fluids

ID1613 - Numerical Evaluation of Aerodynamic Loads and Structural Response in Flow Homogenizer Panels

Speaker:

David Lebrun - Llano

Authors:

Sara Avendaño-Restrepo, Brayan Jaramillo-Alzate, David Lebrun-Llano, Mateo Ortiz-Restrepo, Gabriel Espitia-Mesa, Jorge Mario Tamayo-Avendaño, Gilberto Osorio-Gómez, and Juan Ramírez

Location:

Municipal Convention Center / Machupicchu 2

Date:

10/22/26 10:00 a.m.

Manufacturing and Materials

ID1670 - Generation of G and M Codes Using Artificial Intelligence for the Drilling Process of ASTM A36 Steel Plates

Speaker:

César Ayabaca

Authors:

César Ayabaca, Alexander Guanotuña, Salvatore Reina, Leonardo Tituaña, and Diego Venegas-Vásconez

Location:

Municipal Convention Center / Sacsayhuaman

Date:

10/22/26 3:00 PM

Machine Design

ID173 - DESIGN, CONSTRUCTION, AND VALIDATION OF A TRANSMISSION SYSTEM INTEGRATED INTO THE FRONT STEERING SYSTEM OF A DELTA-CONFIGURATION PEDAL-POWERED VEHICLE

Speaker:

Junior David Sosa Silupú

Authors:

Junior David Sosa Silupú and Carlos Jael Ojeda Diaz

Location:

University Auditorium / Graduation Hall

Date:

10/22/26 9:00 a.m.

Machine Design

ID1752 - CLASSIFICATION OF THE OPERATIONAL STATUS OF A HIGH-SPEED BOGIE USING NEURAL NETWORKS

Speaker:

Alejandro Bustos

Authors:

Alejandro Bustos, Higinio Rubio, Cristina Castejón, and Juan Carlos García Prada

Location:

University Auditorium / Graduation Hall

Date:

10/26/21 2:40 p.m.

Energy and Thermal Fluids

ID1771 - ENERGY DISTRIBUTION AND TRADE-OFFS IN THE COGENERATION OF BIO-OIL, ELECTRICITY, AND HEAT THROUGH THE SUPERCRITICAL WATER GASIFICATION OF LIGNOCELLULOSIC BIOMASS

Speaker:

Thiago Averaldo Bimestre

Authors:

Thiago Averaldo Bimestre, Marcos Buque Cicarelli, Caio Ryuichi Uehara, Amanda Salles Praia, and Nestor Proenza Perez

Location:

Municipal Convention Center / Machupicchu 2

Date:

10/20/26 2:40 p.m.

Energy and Thermal Fluids

ID1797 - POLYCARBONATE SHEET-BASED THERMAL SYSTEM FOR THERMO-PHOTOVOLTAIC COGENERATION

Speaker:

Vicente Flores

Authors:

Vicente Flores, Jorge Bedolla, Carlos Alberto Mora, and Genaro Texcucano

Location:

Municipal Convention Center / Machupicchu 1

Date:

10/22/26 10:20 a.m.

Energy and Thermal Fluids

ID17 - Numerical Simulation of Phase-Change Material with Tailored Properties for Thermal Control of Solar Panels

Speaker:

Edemar Morsch Filho

Authors:

Matheus Zingra Gobetti, Mahbuba Jannat, Sol Carolina Costa Pereira, and Edemar Morsch Filho

Location:

Municipal Convention Center / Machupicchu 2

Date:

10/22/26 9:20 a.m.

Machine Design

ID1845 - GENERATION OF METAMATERIALS USING CELLULAR AUTOMATA FOR THE DESIGN AND MANUFACTURE OF CUSTOMIZED MEDICAL DEVICES: A CASE STUDY OF AN INTERVERTEBRAL DISC IMPLANT

Speaker:

Isaac Castillo-Merino

Authors:

Isaac Castillo-Merino, Alejandro De Blas de Miguel, Carlos Ojeda Díaz, Vanesa Martínez, Andrés Díaz Lantada, and William Solórzano-Requejo

Location:

University Auditorium / Room 2

Date:

10/20/26 2:20 PM

Energy and Thermal Fluids

ID1904 - Effect of Pyrolysis Temperature on Rice Husk Biochar and Its Capacity for Removing Methyl Orange

Speaker:

Carlos A. Medellin

Authors:

Manuel S. Páez, Jesús D. Rhenals, Carlos A. Medellín, Carlos A. Santos, Dairo E. Pérez, and Jorge M. Mendoza

Location:

Municipal Convention Center / Machupicchu 2

Date:

10/20/26 3:00 PM

Manufacturing and Materials

ID1917 - VALIDITY STUDY OF CONSTRUCTION PLATFORMS FOR NON-PLANAR ADDITIVE MANUFACTURING

Speaker:

Álvaro Guzmán Bautista

Authors:

Alicia Zamorano Gándara, Álvaro Guzmán Bautista, and Francisco Franco Martínez

Location:

Municipal Convention Center / Sacsayhuaman

Date:

10/22/26 3:20 PM

Energy and Thermal Fluids

ID2012 - TOWARD NEAR-ZERO-ENERGY SINGLE-FAMILY HOMES IN SANTIAGO, CHILE (CHILE): THE NEW CHILEAN BUILDING THERMAL REGULATIONS

Speaker:

Jesús Las-Heras-Casas

Authors:

Luis M. López-Ochoa, Gabriel Felmer-Plominsky, Manuel A. Mendívil-Giro, Cristina Ramírez-Aragón, and Jesús Las-Heras-Casas

Location:

Municipal Convention Center / Sacsayhuaman

Date:

10/22/26 9:00 a.m.

Mechatronics and Biomechanics

ID2020 - AGRIROVER: DESIGN, MODELING, AND PRELIMINARY EVALUATION OF A LOW-COST, FOUR-WHEEL-STEERING AUTONOMOUS ROVER FOR SUSTAINABLE VITICULTURE

Speaker:

Zandra B. Rivera Chavez

Authors:

Zandra B. Rivera Chavez, Carlos Villagomez Alfaro, Alessia Porcaro, Marco Claudio De Simone, and Domenico Guida

Location:

University Auditorium / Room 1

Date:

10/21/26 4:40 p.m.

Energy and Thermal Fluids

ID2037 - Development of a Low-Cost Anaerobic Digester for Biogas Production on Rural Properties

Speaker:

João Neto Silva de Lima

Authors:

Lukas Brêndhan Kawan Franco de Oliveira, Kleber Lima Cezar, João Neto Silva de Lima, Allysson Macário De Araújo Caldas, and Allan Guiseppe de Araújo Caldas

Location:

Municipal Convention Center / Machupicchu 2

Date:

10/20/26 3:20 PM

Manufacturing and Materials

ID2050 - Automated Visual Inspection for Surface Defect Assessment in AISI 304 GMAW Welded Joints

Speaker:

Roosvel Soto Diaz

Authors:

Roosvel Soto Diaz, Daniela Marquez-Sandoval, Mauricio Vásquez-Carbonell, Hermes Ramirez-Leon, and José Escorcia-Gutierrez

Location:

Municipal Convention Center / Sacsayhuaman

Date:

10/22/26 3:40 p.m.

Manufacturing and Materials

ID2057 - MANUFACTURE OF BIO-BASED COMPOSITE MATERIALS WITH A THERMOPLASTIC MATRIX AND CONTINUOUS NATURAL FIBER REINFORCEMENT USING 3D PRINTING IN FFF MODE WITH IN-SITU IMPREGNATION AND STRESSING

Speaker:

Jimy Unfried-Silgado

Authors:

Oswaldo Rivero-Romero, Henry A. Colorado, and Jimy Unfried-Silgado

Location:

Municipal Convention Center / Sacsayhuaman

Date:

10/20/26 6:00 p.m.

Machine Design

ID2066 - DESIGN OF A POWER TILLER CHASSIS FOR AGRICULTURAL SOIL TILLAGE

Speaker:

Nilo Reyes-Guerrero

Authors:

Nilo Reyes-Guerrero, Olena Leonidivna Naidiuk, Nelson Jara-Cobos, and Fran Reinoso-Avecillas

Location:

University Auditorium / Room 2

Date:

10/20/26 3:40 p.m.

Manufacturing and Materials

ID2099 - ESTIMATION AND EVALUATION OF DIMENSIONAL ERROR IN FDM-FABRICATED PARTS USING COORDINATE MEASUREMENT AND A REDUCED MULTIFACTORIAL EXPERIMENTAL DESIGN

Speaker:

Joel G. Bolívar

Authors:

Joel G. Bolívar, Yefferson E. Angarita, Fernando A. Estrella, Eduardo Pabón, and Neider N. Romero

Location:

Municipal Convention Center / Tipón

Date:

10/22/26 5:40 p.m.

Contact us

For inquiries and suggestions, please use this form:

First and Last Name
Email
Type of inquiry
Message
Thank you, your inquiry/suggestion has been successfully submitted.
Oops! An error occurred while we were trying to send your message.